Management methods and precautions of cold storage warehouse Management methods and precautions of cold storage warehouse In the process of using the cold storage, not only should pay attention to the safety of the use of machinery such as air coolers and condensers, but also the use safety of the warehouse. Safe work can give full play to the role of cold storage and bring you the greatest economic benefits. The warehouse management of cold storage involves many requirements, and it is necessary to establish and improve the post responsibility system, and do every job well. So what is the correct use of the cold storage warehouse? The following points must be done:
1. Prevent water and steam from penetrating into the thermal insulation layer, and strictly guard the five gates of ice, frost, water, door and lamp through the hall and the wall, floor, door, ceiling and other parts of the warehouse. When there is ice, frost, water, etc. Clear.
2. The pipes and air coolers in the warehouse should be cleaned and defrosted in time to improve the cooling efficiency and save electricity. Water should not be accumulated in the water pan of the air cooler. ) Unfrozen hot goods are not allowed to enter the freezer room of frozen goods to prevent damage to the cold storage and ensure the quality of the goods. It is necessary to take care of the cold storage door, close the door when goods enter and exit, and repair the damage of the storage door in time, so as to open flexibly, close tightly, and not escape the cold. The air curtain should function normally.
2. 1 When maintaining the building and maintaining the empty warehouse, the temperature of the freezing room and the freezing room should be kept below 15°C to prevent freeze-thaw cycles; the cooling room should be kept below the dew point temperature to avoid dripping water in the warehouse damp. In order to protect the floor, it is not allowed to lay the goods directly on the floor to freeze. The decoupling or the rubber plate shall not be dropped on the floor, and the piles shall not be dismantled. The management of the antifreeze facilities on the floor should be done well and checked frequently to prevent accidents. Commodity stacking and hanging rail suspension shall not exceed the design load to prevent damage to the building. ) to conduct a comprehensive inspection of the building on a regular basis, and find problems to be dealt with and repaired in time.
3. Regular maintenance of electrical circuits The electrical circuits in the cold room should be maintained frequently to prevent leakage accidents, and the lights should be turned off when leaving the warehouse.
4. Strictly implement the spacing requirements of warehouse spaces. In order to make the stacking of commodities safe and firm, and to facilitate inventory, inspection, and entry and exit of commodities, there are certain requirements for the distance between the stacking of commodity positions and the walls, roofs, pipes and passages.
Post time: Nov-12-2022